Shovelhead Heads Big Bore, SUPER G Intake

(1 customer review)

US$2,040

Shovelhead heads Big Bore 3-5/8″ by Speed And Science ®. CNC Billet Aluminum Headset for the Harley-Davidson™ Shovelhead models, with Single (Y-Split) CNC Billet Aluminum Intake Manifold for Super G style carb

 

Description

Shovelhead Heads Big Bore 3-5/8″ by Speed And Science®. Billet Aluminum (6061-T6) Heads/Intake system for the Harley-Davidson™ Shovelhead models.

  • Bolt-on installation for all ’66-’84 models equipped with 3-5/8″ Bore cylinders. Designed to match S&S™ Sidewinder series pistons (P/N 106-5535,  not supplied).
  • This system achieves very strong torque curve and very respectable HP that peaks exactly where needed.
  • Our product is user-friendly and easy to service down the road also. No custom pistons, valves, guides, fasteners, etc. to worry about.
  • Fast, very efficient ports designed to make peak power/torque within the useful RPM range. Your bike will pull hard from the get-go all the way up to the redline. The longevity and fuel mileage won’t suffer either.
  • Proprietary, super-fast design of the combustion chamber yields 10.05:1 w. 4-1/4″ stroke (10.55:1 w. 4-1/2″ and 10.80:1 w. 4-5/8″ stroke) calculated compression ratio (85CC chambers with Sidewinder pistons). Works well on the hi-octane (e.g. North American 94) pump gas. Compression releases included for easy starting.
  • Valvetrain (AV&V and KPMI) components accept up to .625” valve lift, with almost .200” lift before valve-to-valve contact. Using tall camshafts may require an additional machining to provide necessary clearances.
  • Increased cooling area drops the head’s operating temperature up to 35F.
  • Single (Y-Split) CNC Billet Aluminum Intake Manifold (seals included) interfaces with Super G, PSI Big AIR, etc. We have completely redesigned the Intake <–> Head interface via proper EVO seals to eliminate vacuum leaks.
  • Exhaust interface accepts both OEM single-bolt flanges as well as the aftermarket three-bolt pattern.
  • Hi-tensile steel thread inserts (headbolts, intake, exhaust) installed; all original thread sizes, no need for “special” fasteners.
  • OEM oil drain location.
  • ***The difference in surface finish between the Intake (coarser) and Exhaust (smoother) ports is intentional.
  • Warranty details and conditions are listed in the Installation Manuals ( Manuals download page )

1 review for Shovelhead Heads Big Bore, SUPER G Intake

Powered byCusRev
5.0
Based on 1 review
5 star
100
100%
4 star
0%
3 star
0%
2 star
0%
1 star
0%
1-1 of 1 review
  1. These beauties are gonna scream! Itll be the best shovelhead around both in looks and performance

Add a review
Currently, we are not accepting new reviews

You may also like…