OEM Bore Headset (Shovelhead) with KEIHIN CV Style Single Intake

(1 customer review)

US$2,395.00

Speed And Science OEM Bore CNC Billet Aluminum Headset for the Harley-Davidson™ Shovelhead models, with Single (Y-Split) CNC Billet Aluminum Intake Manifold for KEIHIN CV carb

 

In stock (can be backordered)

Description

  • Speed And Science ® designed OEM Bore Billet Aluminum (6061-T6) Heads/Intake system for the Harley-Davidson™ Shovelhead models.
  • Bolt-on installation for all ’66-’84 72CUI or 80CUI models, designed to match OEM shaped pistons (not supplied) up to 3.527″ dia.
  • This system achieves very strong torque curve and very respectable HP that peaks exactly where needed. This makes a superb street engine that will keep going strong for a long time, not just a 1/4 Mile!! We went to great lengths to make sure that our product is user-friendly and easy to service down the road also. No custom pistons, valves, guides, fasteners, etc. to worry about. Nobody offers that – there’s no hidden cost with our product!!!
  • Fast, very efficient ports designed to make peak power/torque within the useful RPM range. This is where a lot of people get confused. Please remember, the right balance between flow and velocity makes a good port. We could’ve made ANY shape ports and get HUGE flow numbers, but have made it RIGHT instead. As a result, your bike will pull hard from the get-go all the way up to the redline. The longevity and fuel mileage won’t suffer either.
  • Proprietary, super-fast design of the combustion chamber yields 10.35:1 calculated compression ratio with OEM-shaped pistons (@ 80CUI). Works well on the hi-octane (e.g. North American 94) pump gas. Compression releases included for easy starting.
  • AV&V components accept up to .640” valve lift (with optional hi-lift springs), with almost .200” lift before valve-to-valve contact. Using tall camshafts may require an additional machining to provide necessary clearances.
  • Increased cooling area drops the head’s operating temperature up to 35F.
  • Single (Y-Split) CNC Billet Aluminum Intake Manifold (seals included) interfaces with KEIHIN CV, etc. We have completely redesigned the Intake <–> Head interface via proper EVO seals. This particular design eliminates vacuum leaks.
  • Exhaust interface accepts both OEM single-bolt flanges as well as STD’s three-bolt pattern.
  • Hi-tensile steel thread inserts (headbolts, intake, exhaust) installed; all original thread sizes, no need for “special” fasteners.
  • OEM oil drain location.
  • ***The difference in surface finish between the Intake (coarser) and Exhaust (smoother) ports is intentional
  • Warranty details and conditions are listed in the Installation Manuals ( Manuals download page )

1 review for OEM Bore Headset (Shovelhead) with KEIHIN CV Style Single Intake

5 star
100%
4 star
0%
3 star
0%
2 star
0%
1 star
0%
Powered by Customer Reviews Plugin
  1. Roger (verified owner)

    Verified reviewVerified review - view originalExternal link

    Was this review helpful to you?

Only logged in customers who have purchased this product may leave a review.

You may also like…