SHOVELHEAD HEADS BIG BORE, SUPER G Intake

(1 customer review)

US$2,040

Shovelhead heads Big Bore 3-5/8″ by Speed And Science ®. CNC Billet Aluminum Headset for the Harley-Davidson™ Shovelhead models, with Single (Y-Split) CNC Billet Aluminum Intake Manifold for Super G style carb

 

Description

  • Shovelhead Heads Big Bore 3-5/8″ by Speed And Science ®. Billet Aluminum (6061-T6) Heads/Intake system for the Harley-Davidson™ Shovelhead models.
  • Bolt-on installation for all ’66-’84 models equipped with 3-5/8″ Bore cylinders. Designed to match S&S™ Sidewinder series pistons (P/N 106-5535,  not supplied).
  • This system achieves very strong torque curve and very respectable HP that peaks exactly where needed.
  • Our product is user-friendly and easy to service down the road also. No custom pistons, valves, guides, fasteners, etc. to worry about.
  • Fast, very efficient ports designed to make peak power/torque within the useful RPM range. Your bike will pull hard from the get-go all the way up to the redline. The longevity and fuel mileage won’t suffer either.
  • Proprietary, super-fast design of the combustion chamber yields 10.05:1 w. 4-1/4″ stroke (10.55:1 w. 4-1/2″ and 10.80:1 w. 4-5/8″ stroke) calculated compression ratio with Sidewinder pistons. Works well on the hi-octane (e.g. North American 94) pump gas. Compression releases included for easy starting.
  • Valvetrain (AV&V and KPMI) components accept up to .625” valve lift, with almost .200” lift before valve-to-valve contact. Using tall camshafts may require an additional machining to provide necessary clearances.
  • Increased cooling area drops the head’s operating temperature up to 35F.
  • Single (Y-Split) CNC Billet Aluminum Intake Manifold (seals included) interfaces with Super G, PSI Big AIR, etc. We have completely redesigned the Intake <–> Head interface via proper EVO seals to eliminate vacuum leaks.
  • Exhaust interface accepts both OEM single-bolt flanges as well as the aftermarket three-bolt pattern.
  • Hi-tensile steel thread inserts (headbolts, intake, exhaust) installed; all original thread sizes, no need for “special” fasteners.
  • OEM oil drain location.
  • ***The difference in surface finish between the Intake (coarser) and Exhaust (smoother) ports is intentional.
  • Warranty details and conditions are listed in the Installation Manuals ( Manuals download page )

1 review for SHOVELHEAD HEADS BIG BORE, SUPER G Intake

5.0
Based on 1 review
5 star
100
100%
4 star
0%
3 star
0%
2 star
0%
1 star
0%
  1. jason s. (verified owner)

    Verified reviewVerified review - view originalExternal link

    These beauties are gonna scream! Itll be the best shovelhead around both in looks and performance

    (0) (0)

Only logged in customers who have purchased this product may leave a review.

Cancel

You may also like…