SHOVELHEAD HEADS, OEM BORE, SUPER E Intake

(1 customer review)

US$1,930

Shovelhead Heads, OEM Bore by Speed And Science ®. CNC Billet Aluminum Headset for the Harley-Davidson™ Shovelhead models, with Single (Y-Split) CNC Billet Aluminum Intake Manifold for Super E style carb.

 

Available on backorder

Description

  • Shovelhead Heads, OEM Bore by Speed And Science ®. Billet Aluminum (6061-T6) Heads/Intake system for the Harley-Davidson™ Shovelhead models.
  • Bolt-on installation for all ’66-’84 72CUI or 80CUI models, designed to match OEM shaped pistons (not supplied) up to 3.527″ dia.
  • This system achieves very strong torque curve and very respectable HP that peaks exactly where needed. This makes a superb street engine that will keep going strong for a long time, not just a 1/4 Mile!! We went to great lengths to make sure that our product is user-friendly and easy to service down the road also. No custom pistons, valves, guides, fasteners, etc. to worry about. Nobody offers that – there’s no hidden cost with our product!!!
  • Fast, very efficient ports designed to make peak power/torque within the useful RPM range. This is where a lot of people get confused. Please remember, the right balance between flow and velocity makes a good port. We could’ve made ANY shape ports and get HUGE flow numbers, but have made it RIGHT instead. As a result, your bike will pull hard from the get-go all the way up to the redline. The longevity and fuel mileage won’t suffer either.
  • Proprietary, super-fast design of the combustion chamber yields 10.35:1 calculated compression ratio with OEM-shaped pistons (@ 80CUI). Works well on the hi-octane (e.g. North American 94) pump gas. Compression releases included for easy starting.
  • Valvetrain (AV&V and KPMI) components accept up to .625” valve lift, with almost .200” lift before valve-to-valve contact. Using tall camshafts may require an additional machining to provide necessary clearances.
  • Increased cooling area drops the head’s operating temperature up to 35F.
  • Single (Y-Split) CNC Billet Aluminum Intake Manifold (seals included) interfaces with Super E, HS 40MM, HSR42MM, etc. We have completely redesigned the Intake <–> Head interface via proper EVO seals. This particular design eliminates vacuum leaks.
  • Exhaust interface accepts both OEM single-bolt flanges as well as the aftermarket three-bolt pattern.
  • Hi-tensile steel thread inserts (headbolts, intake, exhaust) installed; all original thread sizes, no need for “special” fasteners.
  • OEM oil drain location.
  • ***The difference in surface finish between the Intake (coarser) and Exhaust (smoother) ports is intentional
  • Warranty details and conditions are listed in the Installation Manuals ( Manuals download page )

Additional information

Weight22 lbs
Dimensions22 × 12 × 6 in
Valve Springs

,

1 review for SHOVELHEAD HEADS, OEM BORE, SUPER E Intake

5.0
Based on 1 review
5 star
100
100%
4 star
0%
3 star
0%
2 star
0%
1 star
0%
  1. Anonymous (verified owner)

    Verified reviewVerified review - view originalExternal link

    Look amazing and can’t wait to get them on the scoot. Much better in person, the pictures truly don’t do them justice.

    Was this review helpful to you?
    Yes
    No
  2. Mark E (store manager)

    Thank you!!

Only logged in customers who have purchased this product may leave a review.

Cancel

You may also like…