DISCLAIMER: *** Due to the hi-power output and certain mechanical features, this headset is to be installed/tuned ONLY by an experienced engine builder. Bike to be ONLY used on a closed course. Limited Warranty applies. ***
- Speed And Science ® designed “MIT” Billet Aluminum (6061-T6) CNC Ported Heads for the Harley-Davidson™ Twin Cam models. We took our proven FEROCITY heads, modified/enlarged the ports, modified the valve angles, bump up the compression and used larger, 1.960″ Intake Valve.
- This is a fully assembled, bolt-on set, suitable for up to 110CUI models with flat-top pistons. Set for up to .650″ valve lift.
- 1.810″ Intake Port opening requires larger Intake Manifold / Throttle Body (not included).
- This system is capable of achieving very high HP – it makes a superb performance engine that is user-friendly and easy to service down the road. No special-order pistons, valves, guides, fasteners, etc. to worry about.
- Proprietary ports designed to make peak power at the upper RPM range. Your bike will pull extremely hard from about 2,500 RPM all the way up to the redline.
- Proprietary design of the super-fast 68.25CCM combustion chamber. Hi-octane (e.g. North American 94) pump gas must be used along with the proper (late closing) camshaft and tuning.
- Includes M12x1.25 threaded holes for automatic compression releases.
- ***The difference in surface finish between the Intake (coarser) and Exhaust (smoother) ports is intentional.
- Warranty details and conditions are listed in the Installation Manuals ( Manuals download page )