PANSHOVEL HEADS, OEM BORE, DUAL Independent Intake

US$2,250

Shovelhead Heads, OEM Bore by Speed And Science ®. CNC Billet Aluminum Headset for the Harley-Davidson™ Shovelhead models, with Dual (independent) CNC Billet Aluminum Intake Manifolds.

 

Description

  • PanShovel Heads, OEM Bore by Speed And Science ®. Billet Aluminum (6061-T6) PanShovel heads / intake system for the Harley-Davidson™ Shovelhead models.
  • Bolt-on installation for all ’66-’84 72CUI or 80CUI Shovelhead models, designed to match OEM shaped pistons (not supplied) – including all available overbore sizes.
  • This system achieves very strong torque curve and very respectable HP that peaks exactly where needed.
  • Our product is user-friendly and easy to service down the road also. No custom pistons, valves, guides, fasteners, etc. to worry about.
  • Fast, very efficient ports designed to make peak power/torque within the useful RPM range. Your bike will pull hard from the get-go all the way up to the redline. The longevity and fuel mileage won’t suffer either.
  • Proprietary, super-fast design of the combustion chamber yields 10.35:1 calculated compression ratio with OEM-shaped pistons (@ 80CUI). Works well on the hi-octane (e.g. North American 94) pump gas. Compression releases included for easy starting.
  • Valvetrain (AV&V and KPMI) components accept up to .625” valve lift, with almost .200” lift before valve-to-valve contact. Using tall camshafts may require an additional machining to provide necessary clearances.
  • Increased cooling area drops the head’s operating temperature up to 35F.
  • Dual (independent) CNC Billet Aluminum Intake Manifolds with seals is included. Carb interface: 41.4MM ID, 2-3/4″ x 5/16″ bolthole spacing. We have completely redesigned the Intake <–> Head interface to eliminate vacuum leaks.
  • Exhaust interface accepts both OEM single-bolt flanges as well as the aftermarket three-bolt pattern.
  • Hi-tensile steel thread inserts (headbolts, intake, exhaust) installed; all original thread sizes, no need for “special” fasteners.
  • OEM oil drain location.
  • ***The difference in surface finish between the Intake (coarser) and Exhaust (smoother) ports is intentional.
  • Warranty details and conditions are listed in the Installation Manuals ( Manuals download page )

Additional information

Weight22 lbs
Dimensions22 × 12 × 6 in

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…