Shovelhead Ported Heads “MIT”, Black Coated

US$2,400

Black Shovelhead Ported Heads by Speed And Science ®. CNC Ported, Billet Aluminum Headset for the Harley-Davidson™ Shovelhead models, with CNC Billet Aluminum Intake Manifold of your choice.

 

Available on backorder

Description

SHOVELHEAD PORTED HEADS DISCLAIMER: *** Due to the hi-power output and certain mechanical features, this headset is to be installed/tuned ONLY by an experienced engine builder. Bike to be ONLY used on a closed course. Limited Warranty applies. ***

***UV- and Heat-Resistant Black Anodized parts. Pictures for reference only***

***Please specify the Intake Manifold to be shipped with this headset***

***SPECIAL ORDER ITEM, please allow 3-4 weeks to ship***

  • Shovelhead Ported Heads by Speed And Science ®. This is the MIT version of the Big Bore (3-5/8″) Billet Aluminum (6061-T6) Heads/Intake system for the Harley-Davidson™ Shovelhead models.
  • Bolt-on installation for all ’66-’84 models equipped with 3-5/8″ Bore cylinders. Designed to match S&S™ Sidewinder series pistons (P/N 106-5535,  not supplied).
  • This headset has been designed to make POWER, but our product is still user-friendly and easy to service down the road also. No custom pistons, valves, guides, fasteners, etc. to worry about.
  • Proprietary, super-fast design of the combustion chamber yields 10.05:1 w. 4-1/4″ stroke (10.55:1 w. 4-1/2″ and 10.80:1 w. 4-5/8″ stroke) calculated compression ratio (85CC chambers with Sidewinder pistons). Works well on the hi-octane (e.g. North American 94) pump gas. Compression releases included for easy starting.
  • Valvetrain (AV&V and KPMI) components accept up to .625” valve lift, with almost .200” lift before valve-to-valve contact. Using tall camshafts may require an additional machining to provide necessary clearances.
  • Increased cooling area drops the head’s operating temperature up to 35F.
  • CNC Billet Aluminum Intake Manifold of your choice (seals included) interfaces with Super E, G, PSI Big AIR, etc. We have completely redesigned the Intake <–> Head interface to eliminate vacuum leaks.
  • Exhaust interface accepts both OEM single-bolt flanges as well as the aftermarket three-bolt pattern.
  • Hi-tensile steel thread inserts (headbolts, intake, exhaust) installed; all original thread sizes, no need for “special” fasteners.
  • OEM oil drain location.
  • ***The difference in surface finish between the Intake (coarser) and Exhaust (smoother) ports is intentional.
  • Warranty details and conditions are listed in the Installation Manuals ( Manuals download page )

Reviews

There are no reviews yet

Add a review
Shovelhead Ported Heads "MIT", Black Coated Shovelhead Ported Heads "MIT", Black Coated
Rating*
0/5
* Rating is required
Your review
* Review is required
Name
* Name is required
Add photos or video to your review
* Please tick the checkbox to proceed

You may also like…