Shovelhead Ported Heads “MIT”, SuperG Intake

(2 customer reviews)

US$2,150

Shovelhead Ported Heads by Speed And Science ®. CNC Ported, Billet Aluminum Headset for the Harley-Davidson™ Shovelhead models, with Single (Y-Split) CNC Billet Aluminum Intake Manifold for Super G style carb

 

Description

SHOVELHEAD PORTED HEADS DISCLAIMER: *** Due to the hi-power output and certain mechanical features, this headset is to be installed/tuned ONLY by an experienced engine builder. Bike to be ONLY used on a closed course. Limited Warranty applies. ***

  • Shovelhead Ported Heads by Speed And Science ®. This is the MIT version of the Big Bore (3-5/8″) Billet Aluminum (6061-T6) Heads/Intake system for the Harley-Davidson™ Shovelhead models.
  • Bolt-on installation for all ’66-’84 models equipped with 3-5/8″ Bore cylinders. Designed to match S&S™ Sidewinder series pistons (P/N 106-5535,  not supplied).
  • This headset has been designed to make POWER, but our product is still user-friendly and easy to service down the road also. No custom pistons, valves, guides, fasteners, etc. to worry about.
  • Proprietary, super-fast design of the combustion chamber yields 10.05:1 w. 4-1/4″ stroke (10.55:1 w. 4-1/2″ and 10.80:1 w. 4-5/8″ stroke) calculated compression ratio (85CC chambers with Sidewinder pistons). Works well on the hi-octane (e.g. North American 94) pump gas. Compression releases included for easy starting.
  • Valvetrain (AV&V and KPMI) components accept up to .625” valve lift, with almost .200” lift before valve-to-valve contact. Using tall camshafts may require an additional machining to provide necessary clearances.
  • Increased cooling area drops the head’s operating temperature up to 35F.
  • Single (Y-Split) CNC Billet Aluminum Intake Manifold (seals included) interfaces with Super G, PSI Big AIR, etc. We have completely redesigned the Intake <–> Head interface via proper EVO seals to eliminate vacuum leaks.
  • Exhaust interface accepts both OEM single-bolt flanges as well as the aftermarket three-bolt pattern.
  • Hi-tensile steel thread inserts (headbolts, intake, exhaust) installed; all original thread sizes, no need for “special” fasteners.
  • OEM oil drain location.
  • ***The difference in surface finish between the Intake (coarser) and Exhaust (smoother) ports is intentional.
  • Warranty details and conditions are listed in the Installation Manuals ( Manuals download page )

2 reviews for Shovelhead Ported Heads “MIT”, SuperG Intake

Powered byCusRev
5.0
Based on 2 reviews
5 star
100
100%
4 star
0%
3 star
0%
2 star
0%
1 star
0%
1-2 of 2 reviews
  1. These and all the other parts are STUNNING in person. My engine builder and his employee were giddy like me to actually have them In their greasy hands. I cannot wait (but I will have to…) to be able to fire this new engine up.

    Break in will be to the letter.

    Amazing parts.

    Now….after the break in and an appropriate amount of carefulness…

    We will give her a run on the dyno and see what’s what.

    Did I mention….

    I cannot wait….

    But I will.

    Thank you to ALL INVOLVED

    P.S. When we get it all done…I will send pictures.

  2. Second to none in quality!!

Add a review
Shovelhead Ported Heads "MIT", SuperG Intake Shovelhead Ported Heads "MIT", SuperG Intake
Rating*
0/5
* Rating is required
Your review
* Review is required
Name
* Name is required
Add photos or video to your review
* Please tick the checkbox to proceed

You may also like…