Shovelhead heads OEM Bore, Black Coated

(1 customer review)

US$2,260

Black Shovelhead Heads, OEM Bore by Speed And Science ®. CNC Billet Aluminum Headset for the Harley-Davidson™ Shovelhead models, with CNC Billet Aluminum Intake Manifolds

 

Available on backorder

Description

Shovelhead Heads OEM Bore by Speed And Science®. Billet Aluminum (6061-T6) Heads/Intake system for the Harley-Davidson™ Shovelhead models.

***UV- and Heat-Resistant Black Anodized parts. Pictures for reference only***

***Please specify the Intake Manifold to be shipped with this headset***

***SPECIAL ORDER ITEM, please allow 3-4 weeks to ship***

  • Bolt-on installation for all ’66-’84 72CUI or 80CUI models, designed to match OEM shaped pistons (not supplied) – including all available overbore sizes.
  • This system achieves very strong torque curve and very respectable HP that peaks exactly where needed.
  • Our product is user-friendly and easy to service down the road also. No custom pistons, valves, guides, fasteners, etc. to worry about.
  • Fast, very efficient ports designed to make peak power/torque within the useful RPM range. Your bike will pull hard from the get-go all the way up to the redline. The longevity and fuel mileage won’t suffer either.
  • Proprietary, super-fast design of the combustion chamber yields 10.35:1 calculated compression ratio with OEM-shaped pistons (@ 80CUI). Works well on the hi-octane (e.g. North American 94) pump gas. Compression releases included for easy starting.
  • Valvetrain (AV&V and KPMI) components accept up to .625” valve lift, with almost .200” lift before valve-to-valve contact. Using tall camshafts may require an additional machining to provide necessary clearances.
  • Increased cooling area drops the head’s operating temperature up to 35F.
  • CNC Billet Aluminum Intake Manifolds of your choice (seals included). We have completely redesigned the Intake <–> Head interface to eliminate vacuum leaks.
  • Exhaust interface accepts both OEM single-bolt flanges as well as the aftermarket three-bolt pattern.
  • Hi-tensile steel thread inserts (headbolts, intake, exhaust) installed; all original thread sizes, no need for “special” fasteners.
  • OEM oil drain location.
  • ***The difference in surface finish between the Intake (coarser) and Exhaust (smoother) ports is intentional.
  • Warranty details and conditions are listed in the Installation Manuals ( Manuals download page )

Additional information

Weight 22 lbs
Dimensions 22 × 12 × 6 in

1 review for Shovelhead heads OEM Bore, Black Coated

Powered byCusRev
5.0
Based on 1 review
5 star
100
100%
4 star
0%
3 star
0%
2 star
0%
1 star
0%

Customer Images

Image #1 from Douglas Cooper
Image #2 from Douglas Cooper
Image #1 from Douglas Cooper

Douglas Cooper

These are beautiful and I will definitely be buying the cylinders as well, haven’t got them on yet but as soon as the engine is done I’ll post pictures thank you

Image #2 from Douglas Cooper

Douglas Cooper

These are beautiful and I will definitely be buying the cylinders as well, haven’t got them on yet but as soon as the engine is done I’ll post pictures thank you

Image #1 from Douglas Cooper
Image #2 from Douglas Cooper
1-1 of 1 review
  1. These are beautiful and I will definitely be buying the cylinders as well, haven’t got them on yet but as soon as the engine is done I’ll post pictures thank you

    Image #1 from Douglas Cooper
    Image #2 from Douglas Cooper
Add a review
Shovelhead heads OEM Bore, Black Coated Shovelhead heads OEM Bore, Black Coated
Rating*
0/5
* Rating is required
Your review
* Review is required
Name
* Name is required
Add photos or video to your review
* Please tick the checkbox to proceed

You may also like…